Reference Books On Plastic
  • 1985 Plastic Laminates Seminar : Charleston Marriott, Charleston, Sc, October 27-31, 1985, Atlanta, Ga (Tappi Notes)
  • 1991 U S Foamed Plastics Markets and Directory
  • 1991 U S Foamed Plastics Markets and Directory - 4-6 weeks - $65.00
  • 1992 Rubber Red Book : Elastomerics
  • 1993 Annual Book of Astm Standards : Section 6 : Paints, Related Coatings, and Aromatics : Volume 6.03 : Paint--Pigments, Drying Oils, Polymers, Resi
  • 1993 Annual Book of Astm Standards : Section 8 : Plastics : Volume 8.04 : Plastic Pipe and Building Products/Pcn No. : 01-080493-58
  • 1993 Annual Book of Astm Standards : Section 9 : Rubber : Vol 09.01 : Rubber, Natural and Synthetic- General Test Methods; Carbon Black/Pcn 01-090193
  • 1993 Annual Book of Astm Standards : Section 9 : Rubber : Volume 09.02 : Rubber Products, Industrial- Specifications and Related Test Methods; Gasket
  • 1993 Rubber Red Book : Directory of the Rubber Industry
  • 1994 Annual Book of Astm Standards : Section 6 : Paints, Related Coatings, and Aromatics : Volume 06.03 : Paint Pigments, Drying Oils, Polymers, Resi
  • 1994 Annual Book of Astm Standards : Section 8 : Plastics : Volume 08.04 : Plastic Pipe and Building Products/Pcn 01-080494-58
  • 1994 Annual Book of Astm Standards : Section 9 : Rubber : Volume 09.01 : Rubber, Natural and Synthetic
  • 1994 Annual Book of Astm Standards : Section 9 : Rubber : Volume 09.02 : Rubber Products, Industrial-Specifications and Related Test Methods; Gaskets
  • 1994 IEEE Rubber and Plastics Industry Technical Conference : Conference Record of 1994 Forty-Sixth Annual Conference of Electrical Engineering Probl
  • 1995 Annual Book of Astm Standards : Section 6 : Paoints, Related Coatings, and Aromatics : Volume 06.03 : Paint-Pigments, Drying Oils, Polymers, Res
  • 1995 Annual Book of Astm Standards : Section 8 : Plastics : Volume 08.04 : Plastic Pipe and Building Products/Pcn : 01-080495-58
  • 1995 Annual Book of Astm Standards : Section 9 : Rubber : Volume 09.02 : Rubber Products, Industrial-Specifications and Related Test Methods; Gaskets
  • 1995 Coating Conference/01050495 : Stouffer Hotel, Dallas, Texas, May 19-20 (Proceedings (2 Vol Set))
  • 1995 Dyes, Fillers & Pigments Short Course : Course Notes
  • 1995 Tappi European Plastic Laminates Forum Proceedings Held November 15-17 in Heidelberg Germany
  • 1996 Annual Book of Astm Standards : Section 15 : General Products, Chemical Specialties, and End Use Products : Adhesives : Includes Standards of the
  • 1996 Annual Book of Astm Standards : Section 6 : Paoints, Related Coatings, and Aromatics : Volume 06.03 : Paint-Pigments, Drying Oils, Polymers, Res)
  • 1996 Annual Book of Astm Standards : Section 9 : Rubber : Volume 09.02 : Rubber Products, Industrial-Specifications and Related Test Methods; Gaskets)
  • 1996 Coating Binders Short Course Notes Held January 9-10, 1996 in Baton Rouge, LA
  • 1996 Coating Conference : Oprayland Hotel, Nashville, Tennessee, May 19-22 (Tp 010504/96)
  • 1996 Rubber Red Book
  • 1996 Rubber Red Book (Issn 0361-0640.48th Ed)
  • 1997 Coating Conference (Papers for 97 Conference)
  • 1997 European Workshop on Materials for Advanced Metallization : Conference Microfiche No : 97Tm8287
  • 2nd International Symposium on Polymer Electrolytes - 4-6 weeks
  • 40th Annual Conference Preprint : Rp/C Reinforced Plastics/Composites '85 : 40 Years of Innovative Technology
  • 41st Conference on Electrical Engineering Problems in Rubber and Plastics/89Ch2764-9-Bbl Mf
  • A Glossary of Plastics Terminology in 5 Languages : English Deutsch Francais Espanol Italiano
  • A Glossary of Plastics Terminology in 5 Languages : English, Deutsch, Francais, Espanol, Italiano
  • Absorbent Polymer Technology (Studies in Polymer Science, 8)
  • Additives for Water-Based Coatings : The Proceedings of a Symposium Organised by the North West Region of the Industrial Division of the Royal Societ
  • Adhesion 11
  • Adhesion 12
  • Adhesion 14
  • Adhesion : Technology, Performance and Trends/Marketing or Selling
  • Adhesion and Adhesives : Science and Technology
  • Adhesion Aspects of Polymeric Coatings
  • Adhesion, 13
  • Adhesive Bonding
  • Adhesive Chemistry : Developments and Trends (Polymer Science and Technology, Vol 29)
  • Adhesives (General Products, Chemical Specialties and End Use Products , No 15.6)
  • Adhesives : Adhesives Sealants and Primers
  • Adhesives Age Directory 1995 (Serial)
  • Adhesives Age Directory 1996 (Serial)
  • Adhesives Age Directory, 1994
  • Adhesives and Sealants (Engineered Materials Handbook, Vol 3)
  • Adhesives Engineering/Volume 1999
  • Adhesives from Renewable Resources (Acs Symposium Series 385)
  • Adhesives in Manufacturing
  • Adhesives, Sealants and Coatings for the Electronics Industry
  • Adhesives, Sealants, and Coatings for Space and Harsh Environments (Polymer Science and Technology, Vol 37)
  • Advanced Catalysts and Nanostructured Materials : Modern Synthetic Methods
  • Advanced Composite Materials Index : 1975-1984
  • Advanced Composites Manufacturing
  • Advanced Multilayered and Fibre-Reinforced Composites : Proceedings of the NATO Advanced Research Workshop on Multilayered and Fibre-Reinforced compos
  • Advanced Polymer Composites
  • Advanced Routes for Polymer Toughening (Polymer Science Library, 10)
  • Advanced Surface Coatings : A Handbook of Surface Engineering
  • Advanced Thermoplastic Composites : Characterization and Processing
  • Advanced Thermoset Composites : Industrial and Commercial Applications
  • Advances in Dendritic Macromolecules : 1994
  • Advances in Exterior Body Panels/Sp-698
  • Advances in Interpenetrating Polymer Networks V-1
  • Advances in Interpenetrating Polymer Networks V-2
  • Advances in Interpenetrating Polymer Networks V-3
  • Advances in Interpenetrating Polymer Networks V-4
  • Advances in Medical Plastics
  • Advances in Organic Coatings Science and Technology : 15th International Conference in Organic Coatings Science and Technology Proceedings
  • Advances in Organic Coatings Science and Technology, Vol 9
  • Advances in Particulate Materials
  • Advances in Polyimide Science and Technology : Proceedings of the Fourth International Conference on Polyimides, October 30-November 1, 1991 Ellenvil
  • Advances in Polymer Blends and Alloys : Seminar Notes
  • Advances in Polymer Blends and Alloys Technology
  • Advances in Polymer Science : Metal Complex Catalysts-Superecritical Fluid Polymerisation-Supermolecular Architecture
  • Advances in Polymer Science : Synthesis and Degradation Rheology and Extrusion
  • Advances in Polyurethanes, Elastomers, Coatings, Adhesives and Sealants
  • Advances in Silicone Chemistry
  • Advances in Thermoplastic Matrix Composite Materials (Astm Special Technical Publication, 1044)
  • Advancing Technology in Materials and Processes (Society for the Advancement of Material and Process Engineering Series, Vol 30)
  • American Plastic : A Cultural History
  • Amorphous and Crystalline Insulating Thin Films--1996 : Symposium Held December 2-4, 1996, Boston, Massachusetts, U.S.a (Materials Research Society sy
  • An Introduction to Composite Products : Design, Development and Manufacture
  • An Introduction to Plastics
  • Analysis and Deformulation of Polymeric Materials : Paints, Plastics, Adhesives, and Inks (Topics in Applied Chemistry)
  • Analysis and Performance of Fiber Composites (Spe Mnographs)
  • Analysis, Design and Optimization of Composite Structures
  • Annual Book of Astm Standards, 1997 : Paint-Pigments, Drying Oils, Polymers, Resins, Naval Stores, Cellulosic Esters, and Ink Vehicles (Vol 06.03)
  • Annual Book of Astm Standards, 1997 : Plastic Pipe and Building Products (Vol 08.04)
  • Annual Book of Astm Standards, 1997 : Plastics II: D 2383-D 4322 (Vol 08.02)
  • Annual Book of Astm Standards, 1997 : Rubber Products, Industrial-Specifications and Related Test Methods; Gaskets; Tires (Vol 09.02)
  • Annual Book of Astm Standards, 1997 : Rubber, Natural and Synthetic-General Test Methods; Carbon Black (Vol 09.01)
  • Antec, 1994 : Plastics : Gateway to the Future : Proceedings of Conference Held May 1994 (52nd)
  • Antec, 1995 : Proceedings of 53rd Conference Held May 1995 in Boston, Massachusetts (53rd)
  • Antec, 1996 : Proceedings of 54th Conference Held May 5
  • Antioxidative Stabilization of Polymers
  • Applications of Computer Aided Engineering in Injection Molding
  • Applications of Computer Modeling for Extrusion and Other Continuous Polymer Processes (Computer Aided Engineering for Polymer Processing, Vol 3)
  • Applied Stress Analysis of Plastics : A Mechanical Engineering Approach
  • Aromatic High Strength Fibers (Spe Monographs)
  • Aseptic Processing and Packaging of Particulate Foods
  • Astm Protective Coating Inspection Standards for Field and Shop Applications
  • Astm Standards on Environmentally Degradable Plastics
  • Atlas of Polymer & Plastics Analysis, 2E, Vol. 1, Polymers, Structures & Spectra
  • Atlas of Polymer and Plastics Analysis : Plastics Fibres, Rubbers, Resins
  • Atlas of Polymer and Plastics Analysis : Plastics Fibres, Rubbers, Resins - Starting and Auxiliary Materials, Degradation Products
  • Atlas of Polymer and Plastics Analysis, 3E, Vol. 1, Defined Polymers
  • Atlas of Polymer and Plastics Analysis, 3E, Vol. 2b, Analytical Methods, Spectroscopy, Characteristic Absorptions, Description of Compound Classes
  • Atlas of Polymer and Plastics Analysis/Atlas Der Polymer-Und Kunststoffanalyse : Defined Polymers/Definierte Polymere/Volume 1
  • Atlas of Polymers and Plastics Analysis
  • Automotive Engineering Plastics
  • B. F. Goodrich : Tradition and Transformation, 1870-1995 (Historical Perspectives on Business Enterprise Series)
  • Back to the Future : Society of Plastics Engineers Antec 1992 50 Years Plastics Shaping the Future (Detroit May 3-7)
  • Bakery Technology : Packaging, Nutrition, Product Development, Qa
  • Barrier Polymers and Structures, 197th National Meeting of the American Chemical Society in Dallas, Tx, April 9-14, 1989
  • Basic Principles of Rotational Molding
  • Best of Designs in Plastics
  • Biodegradable Plastics and Polymers : Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan
  • Biodegradable Polymers and Plastics (Special Publication, No. 109)
  • Biomedical Applications of Synthetic Biodegradable Polymers
  • Biomimetics : Design and Processing of Materials (Aip Series in Polymers and Complex Materials)
  • Biorelated Polymers and Gels : Controlled Release and Applications in Biomedical Engineering (Series in Polymers, Interfaces, and Biomaterials)
  • Blow Molding Design Guide
  • Blow Molding Handbook : Technology
  • Blow Molding Handbook : Technology, Performance, Markets, Economics : The Complete Blow Molding Operation
  • Blow Molding Machinery Nomenclature
  • Boron Reinforced Epoxy Systems (Materials Technology Ser.)
  • Carbon and High Performance Fibres Directory
  • Carbon Black
  • Carbon Fibers : Technology, Uses, and Prospects
  • Carbon Reinforced Epoxy Systems
  • Carbon Reinforced Epoxy Systems (Materials Technology Series Vol 13)
  • Carbon Reinforced Epoxy Systems (Materials Technology Series Vol 9)
  • Carbon Reinforced Epoxy Systems (Materials Technology Series Vol. 15)
  • Carbon Reinforced Epoxy Systems (Materials Technology Series, Vol 16)
  • Carbon Reinforced Expoxy Systems (Materials Technology Series Vol 8)
  • Cellulosic Polymers, Blends and Composites
  • Cfc's and the Polyurethane Industry : A Compilation of Technical Publications 1986-1988
  • Cfc's and the Polyurethane Industry : A Compilation of Technical Publications 1988-1989
  • Cfcs & the Polyurethane Industry : A Compilation of Technical Publications, 1992
  • Cfcs and the Polyurethane Industry
  • Characterization and Properties of Ultra-High Molecular Weight Polyethylene (Astm Special Technical Publication, 1307)
  • Characterization of Plastics by Physical Methods : Experimental Techniques and Practical Application
  • Characterization of Solid Polymers : New Techniques and Developments
  • Chemical Compatibility & Environmental Stress Crack Resistance (Plastics Design Library)
  • Chemical Reactions in Plastics Processing
  • Chemistry of Pigments and Fillers
  • Coating and Drying Defects : Troubleshooting Operating Problems (Spe Monographs)
  • Coextrusion Coating and Film Fabrication
  • Colloidal Polymer Particles
  • Coloring of Plastics
  • Competition in the Swiss Plastics Manufacturing Industry : A Group Analysis Based on Micro-Micro Considerations (Contributions in Management Science)
  • Complete Automotive Welding : Metals and Plastics
  • Composite and Reinforced Elements of Constructions
  • Composite Materials : Properties, Nondestructive Testing, and Repair
  • Composite Materials in Maritime Structures : Fundamental Aspects (Cambridge Ocean Technology, No 4)
  • Composite Materials in Maritime Structures : Practical Considerations (Cambridge Ocean Technology Series 5)
  • Composite Materials, : Processing, Fabrication, and Applications
  • Composite Sheet Forming (Composite Materials Series, 11)
  • Composites : A Design Guide
  • Composites Bonding (Stp, 1227)
  • Composites Engineering Handbook
  • Computer Aided Design of Plasticating Screws : Programs in Fortran and Basic
  • Computer Applications in Applied Polymer Science
  • Computer Applications in Applied Polymer Science II : Automation, Modelling, and Simulation (Acs Symposium Series, Vol 404)
  • Computer Modeling for Extrusion and Other Continuous Polymer Process/N0 9305S-3-446
  • Concise Guide to Plastics
  • Conference Proceedings from the Polyurethane World Congress 1992 (628718)
  • Conference Record of 1982 Thirty-Fourth Annual Conference of Electrical Engineering Problems in the Rubber and Plastics Industries (82Ch17485)
  • Conformational Theory of Large Molecules : The Rotational Isomeric State Model in Macromolecular Systems
  • Construction and Structural Adhesives and Sealants : An Industrial Guide
  • Construction Sealants and Adhesives (Wiley Series of Practical Construction Guides)
  • Contemporary Topics in Polymer Science : Advances in New Materials
  • Controlled-Modified Atmosphere/Vacuum Packaging of Foods
  • Corrosion of Plastics and Rubber in Process Equipment-Experiences from the Pulp and Paper Industry
  • Corrosion Resistance Tables : Metals, Nonmetals, Coatings, Mortars, Plastics, Elastomers and Linings, and Fabrics, Part B (Corrosion Technology, 4 B)
  • Corrosion-resistant Plastic Composites in Chemical Plant Design
  • Cs 7-87 Cross Linked Polyethylene Insulashielded Power Cables Rated 46-138
  • Current Technologies in Flexible Packaging (Astm Special Technical Publication, 912)
  • Degradable Polymers, Recycling, and Plastics Waste Management
  • Degradation and Stabilisation of Pvc
  • Deposition Technologies for Films and Coatings : Developments and Applications
  • Design Data for Reinforced Plastics : A Guide for Engineers and Designers
  • Design Formulas for Plastics Engineers
  • Design of Foam-Filled Structures/With 5 1/4 Floppy Disk
  • Design of Plastic Moulds and Dies (Studies in Polymer Science, 3)
  • Design With Reinforced Plastics: : A Guide for Engineers & Designers
  • Designing Plastic Parts for Assembly
  • Designing With Plastics
  • Designing With Reinforced Composites : Technology, Performance, Economics (Spe Books)
  • Determination of Molecular Weight (Chemical Analysis, Vol 103)
  • Development of Exposure Reduction Strategies and Related Costs for Minimizing Employee Exposure to Styrene During Filament Winding As Used in the manu
  • Development of Exposure Reduction Strategies and the Realted Costs for Minimizing Em`loyee Ehposure to Styrene During Hand Lay-Up and Spray-Up As used
  • Development of Exposure Reduction Strategies and the Related Costs for Minimizing Employee Exposure to Styrene During Hand Lay-Up and Spray-Up As used
  • Development of Exposure Reduction Strategies and the Related Costs for Minimizing Employee Exposure to Styrene During the Compression Molding of sheet
  • Development of Exposure Reduction Strategies and the Related Costs for Minimizing Employee Exposure to Styrene During the Injection Molding of Bulk mo
  • Development of Exposure Reduction Strategies and the Related Costs for Minimizing Employee to Styrene During Fabrication by Compression Molding With r
  • Development of Exposure Reduction Stratigies and the Related Costs for Minimizing Employee Exposure to Styrene During the Hand Lay-Up and Spray-Up As
  • Developments in Food Packaging
  • Developments in Injection Moulding
  • Developments in Plastics Technology
  • Developments in Plastics Technology (Developments Series, Vol 2)
  • Developments in Plastics Technology 3
  • Developments in Plastics Technology-4 (Developments Series)
  • Developments in Reinforced Plastics 3
  • Developments in Reinforced Plastics 4
  • Developments in Reinforced Plastics 5 : Processing and Fabrication (Developments Series)
  • Developments in Reinforced Plastics, 2
  • Diaphragm Forming of Continuous Fibre Reinforced Thermoplastics : Process Analysis & Development
  • Dictionary of Plastics & Rubber Technology: English/German
  • Dictionary of Plastics Engineering
  • Dictionary of Plastics Technology/Worterbuch Kunststofftechnologie : Englisch-Deutsch. Herausgegeben Von Hans-Dieter Junge (315P)
  • Dictionary of Plastics Technology: English/German
  • Dictionary of Plastics Testing English/German
  • Dubois and Pribble's Plastics Mold Engineering Handbook
  • Durability of Structural Adhesives
  • Dynamic Loading and Characterization of Fiber-Reinforced Composites
  • Early Plastics : Perspectives, 1850-1950
  • Effects of Hostile Environments on Coatings and Plastics
  • Elasticity and Structure of Polyurethane Networks
  • Electrical and Optical Polymer Systems (Plastics Engineering (Marcel Dekker, Inc.), 45.)
  • Electronic Packaging : Design, Materials, Process, and Reliability (Electronic Packaging and Interconnection)
  • Electronic Packaging and Interconnection Handbook (Electronic Packaging and Interconnection Series)
  • Electronic Packaging of High Speed Circuitry (McGraw-Hill Electronic Packaging and Interconnection Series)
  • Electronic Systems Quality Management Handbook (Electronic Packaging and Interconnection Series)
  • Electronics Packaging Forum : Multichip Module Technology Issues
  • Electrophoretic Composite Coatings (Ellis Horwood Series in Polymer Science and Technology)
  • Elsevier Directories in Chemistry Part I Catalysis and Part II Membranes
  • Emerging Technologies in Plastics Recycling (Acs Symposium Series, 513)
  • Emulsion Polymerization and Emulsion Polymers
  • Encyclopedia of Plastics Polymers and Resins (Supplement A-Z)
  • Encyclopedia of Polymer Science and Engineering
  • Encyclopedia of PVC, Second Edition, Revised and Expanded Vol 1
  • Encyclopedia of PVC, Second Edition, Revised and Expanded Vol 2
  • Encyclopedia of PVC, Second Edition, Revised and Expanded Vol 3
  • Encyclopedia of PVC, Second Edition, Revised and Expanded Vol 4
  • Engineered Interfaces in Fiber Reinforced Composites
  • Engineered Materials Handbook : Engineering Plastics
  • Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures (Cism International Centre for Mechanical Sciences Series No. 348)
  • Engineering Plastics
  • Engineering Plastics (Engineered Materials Handbook, Vol 2)
  • Engineering Plastics : A Handbook of Polyarylethers
  • Engineering Plastics : Economic Commission for Europe, Geneva (Ece/Chem/81)
  • Engineering Plastics and Composities (Materials Data Series)
  • Engineering Thermoplastics
  • Engineering Thermoplastics : Polycarbonates, Polyacetals, Polyesters, Cellulose Esters
  • Engineering With Fibre-Polymer Laminates
  • Engineering with Rigid Pvc
  • English-German Dictionary of Materials and Process Engineering : Comprising Metals, Plastics, Ceramics, Composites, Manufacturing, Processing, applica
  • Enough for One Lifetime : Wallace Carothers, Inventor of Nylon (History of Modern Chemical Sciences)
  • Environmental Stress Cracking of Plastics
  • European Consumer Packaging Marketing Directory
  • Everyday Elegance : 1950s Plastics Design : With Price Guide
  • Experimental Strategies for Polymer Scientists and Plastics Engineers (Spe Books)
  • Extruder Principles and Operations
  • Extrusion : Processes, Machinery, Tooling
  • Extrusion : Scientific and Technical Development
  • Extrusion Dies for Plastics and Rubber : Design Engineering Computations (Spe Books)
  • Extrusion of Plastics
  • Facts & Figures of the U.S. Plastics Industry, 1993
  • Failure Modes and Mechanisms in Electronic Packages
  • Failure of Plastics
  • Fatigue of Engineering Plastics
  • Fatique and Tribological Properties of Plastics and Elastomers
  • Fiber-reinforced Composites
  • Fiber-Reinforced Plastic Pressure Vessels : 1992 Asme Boiler and Pressure Vessel Code X (Rx0100)
  • Fiberglass & Composite Materials : An Enthusiast's Guide to High Performance Non-Metallic Materials for Automotive Racing and Marine Use
  • Fiberglass Pipe Design Manual (Manual of Water Supply Operations, M45)
  •  Fiberglass Reinforced Plastics
  •  Fiberglass-Reinforced Plastic Pressure Vessels 1986 Asme Boiler and Pressure Vessel Code
  •  Fibre Reinforced Composites (Mep250)
  •  Fibre Reinforced-Plastic (Frp Reinforcement for Concrete Structures : Properties and Applications)
  •  Fibre-Resin Composites : New Applications and Developments
  •  Fillers : Proceedings of the Joint Conference of the Plastics and Rubber Institute and the British Plastics Federation March, 1986
  •  Film Extrusion 1982
  •  Film Extrusion Manual-Process Materials, Properties : Process, Materials, Properties
  •  Finishing Systems Design and Implementation : A Guide for Product Parameters, Coatings, Process, and Equipment
  •  Finite Element Analysis of Composite Laminates (Solid Mechanics and Its Applications, Vol 7)
  •  Fire Property Data : Cellular Plastics
  •  Flame Retardants '92
  •  Flammability Handbook for Plastics
  •  Flammability of Cellular Plastics, Part 2
  •  Flexible Food Packaging : Questions and Answers
  •  Flexible Printed Circuitry (Electronic Packaging and Interconnection Series)
  •  Flip Chip Technologies (Electronic Packaging and Interconnection Series)
  •  Flow Analysis of Injection Molds
  •  Foam and Foam Films : Theory, Experiment, Application (Studies in Interface Science, V. 5.)
  •  Foams : Fundamentals and Applications in the Petroleum Industry (Advances in Chemistry Series, No 242)
  •  Food and Packaging Interactions (Acs Symposium Series, 365)
  •  Food and Packaging Interactions II (Acs Symposium Series, No. 473)
  •  Food Packaging
  •  Food Packaging and Preservation
  •  Food Packaging Technology
  •  Food Packaging Technology (Astm Special Technical Publication, 1113)
  •  Food Product
  •  Food Science Reviews
  •  Food Science Reviews : Chemical Migration from Packaging
  •  Foodplas Nine 1992 : Main Conference
  •  Foodplas Vi-89 Plastics in Food Packaging : Proceedings from the Sixth Annual Foodplas Conference/March 7-9, 1989 Orlando, Florida
  • Foodplas Vii-90 : Plastics in Food Packaging : Proceedings from the Seventh Annual Foodplas Conference March 5-8, 1990 New Orleans, Louisiana
  • Foodplas, Viii-91 : Plastics in Food Packaging : Proceedings of the 8th Annual Foodlas Conference March 5-7, 1991 Orlando, Florida
  • Foods and Packaging Materials-Chemical Interactions (Royal Society of Chemistry Special Publication, No 162)
  • Formulating Plastics and Elastomers by Computer
  • Fracture Mechanics of Composite Material Laminates
  • Fundamental Principles of Polymeric Materials (Society of Plastics Engineers Monographs)
  • Fundamentals of Adhesion
  • Fundamentals of Adhesion and Interfaces
  • Giant Molecules : Essential Materials for Everyday Living and Problem Solving (Spe Monographs)
  • Giant Molecules : Here, There, and Everywhere...
  • Glass Reinforced Epoxy System (Materials Technology Ser: Vol 10)
  • Glass Reinforced Plastics
  • Glass Reinforced Polyester Systems (Materials Technology Series, Vol 14)
  • Guide for the Selection of Polymer Adhesives With Concrete/503.5R.92
  • Handbook of Adhesive Technology
  • Handbook of Adhesives Raw Materials
  • Handbook of Coatings Additives
  • Handbook of Deposition Technologies for Films and Coatings : Science, Technology and Applications
  • Handbook of Dimensional Measurement
  • Handbook of Elastomers
  • Handbook of Fillers for Plastics
  • Handbook of Hazardous and Toxic Properties of Polymer Chemicals
  • Handbook of Paint and Coating Raw Materials
  • Handbook of Paint and Coating Raw Materials : Chemical Products With Trade Name Cross-Reference
  • Handbook of Paint and Coating Raw Materials : Trade Name Products
  • Handbook of Plastic and Rubber Additives : An International Guide to More Than 13,000 Products by Trade Name, Chemical, Function, and Manufacturer
  • Handbook of Plastic Compounds, Elastomers and Resins : An International Guide by Category, Tradename, Composition and Supplier
  • Handbook of Plastic Foams : Types, Properties, Manufacture and Applications
  • Handbook of Plastic Materials and Technology
  • Handbook of Plastics Joining : A Practical Guide (Pdl Handboook Series)
  • Handbook of Plastics Test Methods
  • Handbook of Plastics Testing Technology
  • Handbook of Plastics Testing Technology (Society of Plastics Engineers Monographs)
  • Handbook of Plastics Testing Technology (Society of Plastics Engineers Monographs) - Ainda não publicado
  • Handbook of Plastics, Elastomers, and Composites
  • Handbook of Polymer Coatings for Electronics : Chemistry, Technology and Applications (Materials Science and Process Technology Series)
  • Handbook of Polymer Synthesis
  • Handbook of Polymeric Foams and Foam Technology
  • Handbook of Polyolefins
  • Handbook of Polyvinyl Chloride Formulating
  • Handbook of Radical Vinyl Polymerization (Plastics Engineering)
  • Handbook of Short Fiber Reinforced Plastics
  • Handbook of Solid Modeling
  • Handbook of Thermoplastic Elastomers
  • Handbook of Thermoplastic Piping System Design
  • Handbook of Thermoplastics
  • Handbook of Thermoplastics Injection Mould Design
  • Handbook of Toxic Properties of Monomers and Additives
  • Hazardous Chemicals in the Polymer Industry
  • Heterogeneous Modification of Polymers : Matrix and Surface Reactions
  • High Nitrile Polymers for Beverage Container Applications
  • High Performance Polymers and Composites (Encyclopedia Reprint Series)
  • How to Make Injection Molds (Spe Books)
  • How to Manage Plastics Waste : Technology and Market Opportunities (Polymer Processing Institute)
  • Hydraulics for Operators (Operator's Guide Series)
  • Ici Polyurethanes Book
  • IEEE Rubber and Plastics Industry Technical Conference 1990 (Order #Ch2862)
  • Impact Modifiers for Pvc : The History and Practice (Spe Monographs Series)
  • Improving Tamper-Evident Packaging : Problems, Tests and Solutions
  • Industrial Applications of Adhesive Bonding
  • Industrial Color Testing: Fundamentals and Techniques
  • Industrial Inorganic Pigments
  • Industrial Materials : Polymers, Ceramics and Composites
  • Industrial Organic Pigments : Production, Properties, Applications
  • Industrial Packaging Adhesives
  • Industrial Plastics : Theory and Application
  • Information Sources in Polymers and Plastics (Guides to Information Sources)
  • Infrared Spectra Handbook of Adhesives and Sealants
  • Injection and Compression Molding Fundamentals
  • Injection Molding : An Introduction
  • Injection Molding : Theory and Practice
  • Injection Molding Machines : A User's Guide
  • Injection Molding of Engineering Thermoplastics (Pocket Guides to Plastics)
  • Injection Molding of Thermoplastic Materials (Pocket Guides to Plastics)
  • Injection Molding of Thermoplastics Materials (Pocket Guides to Plastics)
  • Injection Molds : 108 Proven Designs
  • Injection Moulding Machines
  • Injection/Transfer Molding of Thermosetting Plastics
  • Innovation : Award-Winning Industrial Design
  • Innovation in Polymer Processing : Molding
  • Instrument Engineers' Handbook, Volume 1: Process Measurement
  • Instrument Engineers' Handbook, Volume 2: Process Control
  • Instrumentation and Automation in the Paper, Rubber, Plastics and Polymerization Industries
  • Instrumentation for Thermoplastics Processing
  • Instrumented Impact Testing of Plastics and Composite Materials : A Symposium (Astm Special Technical Publication, 936)
  • Integrated Circuit, Hybrid, and Multichip Module Package Design Guidelines : A Focus on Reliability
  • Interfacial Aspects of Multicomponent Polymer Materials (The Language of Science)
  • Internal Stresses, Dimensional Instabilities and Molecular Orientations in Plastics
  • International Plastics Flammability Handbook : Principles Regulations Testing and Approval
  • International Progress in Urethanes
  • Introduction to Design and Analysis With Advanced Composite Materials
  • Introduction to Plastics and Composites
  • Introduction to Polymer Dynamics (Lezioni Lincee Lectures)
  • Introduction to Polymer Physics
  • Introduction to Polymer Viscoelasticity
  • Inventing Polymer Science : Staudinger, Carothers, and the Emergence of MacRomolecular Chemistry (Chemical Sciences in Society Series)
  • Ionomers : Characterization, Theory, and Applications
  • Iso and Iec Selected Standards for the Plastics Industry
  • Iso Handbook Twenty-One on Plastics : 1990
  • Joining Fibre-Reinforced Plastics
  • Key Day Planner C/Ww95/Us
  • Key Design Center 3D C/M&W/Us
  • Key Form Designer C/Ww95/Us
  • Key Label Designer C/Win/Us
  • Key Master Maps C/Ww95/Us
  • Key Multimedia Greetings C/Ww95/Us
  • Key Photo Gallery C/Win/Us
  • Key Resume Designer C/Win/Us
  • Lactam-Based Polyamides : Modification, Technology, and Application
  • Liquid Film Coating : Scientific Principles and Their Technological Implications
  • Liquid Moulding Technologies : Resin Transfer Moulding, Structural Reaction Injection Moulding, and Related Processing Techniques
  • Low Density Cellular Plastics : Physical Basis of Behaviour
  • Machinery Adhesives for Locking, Retaining, and Sealing
  • MacRocyclic Polyether Syntheses (Reactivity and Structure : Concepts in Organic Chemistry, V. 13)
  • Managing Corrosion With Plastics
  • Manual of Plastics Analysis
  • Manual on Determination of Volatile Organic Compound (Voc Content in Paints, Inks, and Related Coating Products)
  • Manufacture of Printed Materials for Use in the Packaging and Labelling of Medicinal Products (Iso-9000 : Codes of Practice for Pharmaceutical)
  • Marketing/Technical Sessions of the Composites Institute's 48th Annual Conference and Expo '93 February 8-11, 1993
  • Materials for Conservation : Organic Consolidants, Adhesives and Coatings (Butterworths Series in Conservation and Museology)
  • Materials for Electronic Packaging
  • Materials Science of Polymers for Engineers
  • Measuring Process Capability : Techniques and Calculations for Quality and Manufacturing Engineers
  • Mechanical Behaviour of Composites and Laminates
  • Mechanical Fastening of Plastics
  • Mechanics of Composite Materials (Mechanical Engineering Series)
  • Mechanics of Fibrous Composites
  • Mechanics of Laminated Composite Plates : Theory and Analysis
  • Mechanics of Plastics and Plastic Composites/H00541
  • Medical and Hospital Plastic Products : A Special Report on New Applications and Current Research
  • Medical Device Packaging Handbook
  • Melt Rheology and Its Role in Plastics Processing : Theory and Applications
  • Metal Filled Polymers
  • Metallization of Polymers (Acs Symposium Series, No 440)
  • Metallized Plastic
  • Metallized Plastics 2 : Fundamental and Applied Aspects
  • Metallized Plastics 3 : Fundamental and Applied Aspects
  • Metallized Plastics : Fundamental and Applied Aspects
  • Metallurgy and Plastics for Engineers
  • Metodos Sencillos De Identificacion De Plasticos 2/E
  • Micromechanical Modelling of the Transverse Strenghts of Unidrectional Glass Fibre Reinforced Polyester
  • Microstructural Characterisation of Fibre-Reinforced Composites
  • Mixed Plastics Recycling Technology
  • Mixing in Polymer Processing
  • Modelling of the Impact Response of Fibre-Reinforced Composites
  • Modern Coating and Drying Technology (Advances in Interfacial Engineering Series)
  • Modern Fluoropolymers : High Performance Polymers for Diverse Applications (Wiley Series in Polymer Science)
  • Modern Methods of Polymer Characterization (Chemical Analysis : A Series of Monographs on Analytical Chemistry and It's Applications, Vol 113)
  • Modern Plastics Ency 97/E
  • Modern Plastics Encyclopedia 1991
  • Modern Plastics Encyclopedia, 1985-86
  • Modern Plastics Encyclopedia, 1986-87
  • Modern Plastics Encylclopedia, 1994
  • Modified Polyester Fibres (Textile Science and Technology, Vol 10)
  • Molded Thermosets : A Handbook for Plastics Engineers, Molders, and Designers
  • Molding of Thermosetting Plastics (Pocket Guides to Plastics)
  • Molecular Dynamics of Additives in Polymers
  • Moving Ahead With Iso 14000 : Improving Environmental Management and Advancing Sustainable Development (Wiley Series in Environmental Quality manageme
  • Multicomponent Polymer Materials (Advances in Chemistry Series, 211)
  • N-Nylons : Their Synthesis, Structure, and Properties
  • New Advances in Polyolefins (The Language of Science)
  • New Applications of Plastic Components in Vehicle Design (Sp (Society of Automotive Engineers), 1166)
  • New Characterization Techniques for Thin Polymer Films (Spe Monographs)
  • New Developments in Polymer Composites for Automotive Applications (Sp-784)
  • New Fibres and Their Composites
  • New Plastics Applications for the Automotive Industry (S P (Society of Automotive Engineers), Sp 1253)
  • New Polymer Technology for Auto Body Exteriors (Aiche Symposium Series, No 260 Vol 84)
  • New Technology-Shifting Markets : The Plastics Industry Responds to a Wave of Change
  • Noah IV : Directory of International Package Design
  • Noah V : Directory of International Package Design
  • Non-Destructive Testing of Fibre-Reinforced Plastics Composites
  • Nonlinear Phenomena in Flows of Viscoelastic Polymer Fluids
  • Nylon Plastics Handbook
  • Occupational Health Program Manufacturing Feasibility Study : Development of Exposure Reduction Strategies... During Compression Molding of Bmc
  • Oligomer Technology and Applications
  • Organic Coatings
  • Organic Coatings : Science and Technology : Applications, Properties, and Performance (Spe Monographs)
  • Organic Coatings : Science and Technology : Film Formation, Components, and Appearance (Spe Monographs)
  • Organic Coatings for Corrosion Control (Acs Symposium Series, No 689)
  • Package Design : Jpda Member's Work Today 1994
  • Packaging & Marketing Index in Japan 1987
  • Packaging : Food Cycle Technology Source Books
  • Packaging Alternatives for Food Processors
  • Packaging and Environmental Issues
  • Packaging and Solid Waste : Management Strategies (Ama Management Briefing)
  • Packaging and the Environment
  • Packaging and the Environment : Alternatives, Trends and Solutions
  • Packaging Buyers' Guide, 1994 : Supplemental Source Guide
  • Packaging Design ((Issues in Design Ser.))
  • Packaging of Electronic Systems : A Mechanical Engineering Approach (McGraw-Hill Series in Mechanical Engineering)
  • Packaging of Healthcare Devices and Products V : Fifth Annual Healthpack Conference, November 2-3, 1995. North-Brook, Il
  • Packaging of Pharmaceuticals and Healthcare Products
  • Packaging Sourcebook 1997
  • Packaging Sourcebook : International 1998 (Serial)
  • Packaging Sourcebook : North America 1998 (Serial)
  • Paint and Coating Testing Manual : Fourteenth Edition of the Gardner-Sward Handbook (Astm Manual, Mnl 17)
  • Paint Flow and Pigment Dispersion : A Rheological Approach to Coating and Ink Technology
  • Partners for Progress : Ufex-12 Conference of the Polyurethane Foam Contractors.Div of the Soc of the Plastics Industry Inc, Feb 14-18, 1987
  • Photonic Polymer Systems (Plastics Engineering)
  • Physical Properties of Polymers Handbook (Aip Series in Polymers and Complex Materials)
  • Physics of Plastics : Processing, Properties and Materials Engineering
  • Physics of Plastics : Processing, Properties, and Materials Engineering
  • Physics of Polymer Surfaces and Interfaces
  • Pigment Handbook
  • Pigment Handbook : Properties and Economics
  • Pioneer Plastic : The Making and Selling of Celluloid
  • Pioneers in Polymer Science (Chemists and Chemistry)
  • Plasma Processing of Polymers (NATO Asi Series. Series E, Applied Sciences, No. 346.)
  • Plastic : The Making of a Synthetic Century
  • Plastic Blow Molding Handbook
  • Plastic Component Design
  • Plastic Design to Bs 5950
  • Plastic Film Technology : Extrusion of Plastic Film and Sheeting
  • Plastic Optical Fibres : Practical Applications : Club Des Fibres Optiques Plastiques (Cfop) France
  • Plastic Part Technology
  • Plastic-Encapsulated Microelectronics : Materials, Processes, Quality, Reliability, and Applications
  • Plasticisers : Principles and Practice
  • Plasticity and Creep : Theory, Examples, and Problems
  • Plastics : America's Packaging Dilemma : Environmental Action Coalition (Island Press Critical Issues Eries, No. 3)
  • Plastics : Components, Processes and Technology (S P (Society of Automotive Engineers), 1340)
  • Plastics : Microstructure and Engineering Applications
  • Plastics : Molding the Past, Shaping the Future (Encyclopedia of Discovery and Inventions Series)
  • Plastics : Product Design and Process Engineering (Spe Books)
  • Plastics Additives : An Industrial Guide
  • Plastics Additives and Modifiers Handbook
  • Plastics and Design
  • Plastics and Plastic Composites : Material Properties, Part Performance, and Process Simulation (Md, Vol 29)
  • Plastics and Polymer Processing Automation
  • Plastics and Resin Compositions
  • Plastics and Technology (Australian Technology Series)
  • Plastics Compounding : Equipment and Processing (Polymer Processing Institute Books from Hanser Publishers)
  • Plastics Engineering
  • Plastics Engineering Dictionary : English-German-French-Russian
  • Plastics Extrusion Technology
  • Plastics Extrusion Technology Handbook
  • Plastics Films
  • Plastics for Electronics : Materials, Properties, and Design Applications (Electronic Packaging and Interconnection)
  • Plastics for Engineers : Materials, Properties, Applications
  • Plastics for Food Packaging : U.S. Materials, Applications, Markets
  • Plastics from Microbes : Microbial Synthesis of Polymers and Polymer Precursors
  • Plastics Gearing
  • Plastics Handbook
  • Plastics in a World Economy
  • Plastics in Automobile Instrument Panels, Trim and Setting (Sp-822)
  • Plastics in Automobiles : Bumper Systems, Interior Trim, Instrument Panels, and Exterior Panels (Sp-772)
  • Plastics in Automotive Applications : An Overview (Progress in Technology, No. 32)
  • Plastics in Automotive Engineering : Materials, Components, Systems
  • Plastics in Food Packaging
  • Plastics in Medicine : Science and Law : Subject Analysis Index With Reference Bibliography
  • Plastics in Medicine, Science and Law : Subject Analysis Index With Reference Bibliography
  • Plastics in Passenger Cars (S P, 566)
  • Plastics in the Automobile Industry (R0147)
  • Plastics Industry Safety Handbook
  • Plastics Materials
  • Plastics Molding : Equipment, Processes, and Materials
  • Plastics Processing Data Handbook
  • Plastics Processing Technology
  • Plastics Products Design Handbook
  • Plastics Recognized Component Directory 1997
  • Plastics Recognized Components Directory 1995
  • Plastics Recognized Components Directory 1996
  • Plastics Recycling : Products and Processes With 77 Figures and 98 Tables
  • Plastics Recycling As a Business Opportunity : May 20-21, 1993 Doubletree Hotel Arlington, Virginia : Recyclingplas VIII Conference
  • Plastics Recycling As a Future Business Opportunity : Proceedings (Recycling Pas III Conference May 1988)
  • Plastics Recycling As a Future Business Opportunity : Proceedings Technology Exchange Program May 23-24, 1990 at the Mayflower Hotel Washington, D.C.
  • Plastics Recycling As a Future Business Opportunity : Proceedings Technology Exchange Program Recyclingplas IV Conference
  • Plastics Recycling As a Future Business Opportunity : Proceedings/Technology Exchange Program
  • Plastics Technical Dictionary : English-German German-English Illustrated Systematic Groups
  • Plastics Technology Handbook
  • Plastics Technology Handbook (Plastics Engineering, Vol 26)
  • Plastics Technology Manufacturing Handbook and Buyer's Guide
  • Plastics Waste
  • Plastics Waste Management
  • Plastics, Rubber, and Paper Recycling : A Pragmatic Approach (Acs Symposium Series, 609)
  • Polyester
  • Polyester Molding Compounds
  • Polyimides
  • Polyimides : Materials, Chemistry and Characterization : Proceedings of the Third International Conference on Polyimides, Ellenville, New York, Novem
  • Polymer Composites Applications for Motor Vehicles (S P, No 850)
  • Polymer Composites for Civil and Structural Engineering
  • Polymer Concrete/Sp-137
  • Polymer Extrusion (Spe Books)
  • Polymer Handbook
  • Polymer Mixing : A Self-Study Guide
  • Polymer Mixing and Extrusion Technology
  • Polymer Modification
  • Polymer Powder Technology
  • Polymer Process Engineering
  • Polymer Processing : Principles and Design
  • Polymer Science and Technology
  • Polymer Surface Modification : Relevance to Adhesion
  • Polymer Surfaces : From Physics to Technology
  • Polymer Surfaces from Physics to Technology
  • Polymer Syntheses (Organic Chemistry (New York, N.Y.), V. 29.)
  • Polymer Synthesis and Characterization : A Laboratory Manual
  • Polymer Technology Dictionary
  • Polymer Thick Film : Today's Emerging Technology for a Clean Environment Tomorrow
  • Polymer Toughening
  • Polymeric Compatibilizers : Uses and Benefits in Polymer Blends
  • Polymeric Foams : Science and Technology (Acs Symposium Series, 669)
  • Polymeric Materials and Processing : Plastics, Elastomers and Composites
  • Polymeric Materials Encyclopedia
  • Polymeric Materials for Electronics Packaging and Interconnection (Acs Symposium Series, 407)
  • Polymers and Biomaterials : Proceedings of the Symposia E, Advanced Engineerings Plastics, F, Funcional Polymers, and L, Biomedical Materials of the
  • Polymers and Plastics : What Every Chemical Technologist Wants to Know About...
  • Polymers As Materials for Packaging (Ellis Horwood Series in Polymer Science and Technology)
  • Polymers in Microelectronics : Fundamentals and Applications
  • Polypropylene : Structure, Blends and Composites : Composites
  • Polypropylene : Structure, Blends and Composites : Structure and Morphology
  • Polypropylene : Structure, Blends and Composites : Structure and MorpPolypropylene and Other Polyolefins : Polymerization and Characterization (Studies in Polymer Science, No. 7)
  • Polypropylene Handbook : Polymerization, Characterization, Properties, Processing, Applications
  • Polypropylene Structure, Blends and Composites : Copolymers and Blends
  • Polyurethane : New Paths to Progress, Marketing, Technology : Proceedings of the Spi 6th International Technical/Marketing Conference, 1983
  • Polyurethane Elastomers
  • Polyurethane Foam Sorbents in Separation Science
  • Polyurethane Handbook : Chemistry
  • Polyurethane Marketing and Technology : Partners in Progress
  • Polyurethanes 90 : Proceedings of the Spi 33rd Annual Technical/Marketing Conference : September 30-October 3, 1990 Orlando, Florida
  • Polyvinyl Alcohol : Developments
  • Polyvinyl Alcohol Fibers
  • Polyvinylchloride : Environmental Aspects of a Common Plastic
  • Practical Analysis of Composite Laminates
  • Practical Application of Spc in the Flexible Packaging Industry
  • Practical Hydraulics Handbook
  • Practical Thermoforming
  • Prediction of Polymer Properties (Plastics Engineering Series, Vol 27)
  • Pressure-Sensitive Adhesives Technology
  • Principles and Applications of Modified Atmosphere Packaging of Foods
  • Principles of Composite Material Mechanics (McGraw-Hill Series in Mechanical Engineering)
  • Principles of Modified-Atmosphere & Sous Vide Product Packaging
  • Principles of Plastics Extrusion : A Teaching Programmer
  • Principles of Polymer Chemistry
  • Principles of Polymer Engineering
  • Principles of Polymer Processing
  • Principles of Polymerization
  • Print Buyer's Bible : Packaging
  • Processes for Major Addition-Type Plastics and Their Monomers
  • Processing and Packaging of Heat Preserved Foods
  • Product Design and Testing of Polymeric Materials
  • Product Design With Plastics : A Practical Manual
  • Production and Packaging of Non-Carbonated Fruit Juices and Fruit Beverages
  • Pvc : Production, Properties and Uses
  • Qualifications Start Ups & Tryouts of Injection Molds : How to Start Up New Tooling, How to Keep Tools Optimized, How to Qualify New Tooling
  • Quality Assurance of Polymeric Materials and Products (Astm Special Technical Publication, No 846)
  • Quality Assurance Report
  • Quality Control of Packaging Materials in the Pharmaceutical Industry
  • Quality Handbook for Composite Materials
  • Quality Rules in Packaging
  • Radiation-Chemical Processes in Solid Phase : Theory and Application
  • Rapra New Trade Names in the Rubber and Plastics Industries, 1986
  • Rauch Guide to the U S Adhesives and Sealants Industry (Rauch Industrial Marketing Guide)
  • Rauch Guide to the U.S. Plastics Industry, 1997 (Rauch Industrial Marketing Guide)
  • Raw Materials Data Handbook : Pigments
  • Raw Materials for Pigments Fillers and Extenders
  • Reaction Injection Molding : Polymer Chemistry and Engineering (A C S Symposium Series, No 270)
  • Reaction Injection Molding and Fast Polymerization Reactions
  • Reaction Injection Molding Machinery and Processes
  • Reaction Polymers : Polyurethanes, Epoxies, Unsaturated Polyesters, Phenolics, Special Monomers and Additives : Chemistry, Technology, Applications
  • Reaction Polymers : Polyurethanes, Epoxies, Unsaturated Polyesters, Phenolics, Special Monomers and Additives : Chemistry, Technology, Applications,
  • Reactive Extrusion
  • Reactive Extrusion : Principles and Practice (Polymer Processing Institute)
  • Recycling and Recovery of Plastics
  • Recyclingplas II Conference : Plastics Recycling As a Future Business Opportunity (Proceedings of the Technology Exchange Program)
  • Recyclingplas IV Plastics Recycling
  • Reinforced Plastics : Properties and Applications
  • Reinforced Plastics for Commercial Composites : Source Book
  • Reinforced Plastics Handbook
  • Resin Transfer Moulding
  • Resins (What Every Chemical Technologists Wants to Know, No 5)
  • Resins Committee Test Procedures
  • Resins for Coatings : Chemistry, Properties and Applications
  • Returnable and Non-Returnable Packaging : The Management of Waste and Resources Towards an Eco-Social Market Economy
  • Rheological Fundamentals of Polymer Processing (NATO Asi Series. Series E, Applied Sciences, Vol. 302)
  • Rheometers for Molten Plastics : A Practical Guide to Testing and Property Measurement
  • Rigid and Semi-Rigid Plastic Containers
  • Rim : Fundamentals of Reaction Injection Molding
  • Rosato's Plastics Encyclopedia and Dictionary
  • Rotational Moulding of Plastics (Polymer Engineering Series, 2)
  • Rotational Moulding of Plastics (Polymer Engineering Series, No 1)
  • Rubber Compounding
  • Rubber Toughened Engineering Plastics
  • Rubber-Toughened Plastics (Advances in Chemistry Series, 222)
  • Saechtling International Plastics Handbook : For the Technologist, Engineer and User
  • Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing : 3rd Volume/Stp 1254
  • Science and Technology of Rubber
  • Secondary Reclamation of Plastics Waste : Research Report Phase 1 : Development of Techniques for Preparation and Formulation
  • Secrets of Building a Plastic Injection Molding Machine
  • Selected Astm Standards on Packaging
  • Selecting Thermoplastics for Engineering Applications
  • Sheet Molding Compound Materials : Science & Technology
  • Short Fiber Reinforced Composite Materials-Stp 772
  • Side-Chain Liquid Crystalline Polycarbonates : Synthesis, Mesomorphic Properties & Dielectric & Mechanical Analysis
  • Silane Coupling Agents
  • Simple Methods for Identification of Plastics
  • Simple Methods for Identification of Plastics : With the Plastics Identification Table by Hansjurgen Saechtling
  • Smart Autoclave Cure of Composites
  • Some Chemicals Used in Plastics and Elastomers (Iarc Monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol 39)
  • Sourcebook of Advanced Polymer Laboratory Preparations
  • Spatially Reinforced Composites
  • Spe Forty-Seventh Annual Technical Conference and Exhibits : Plastics Create a World of Difference (Order No. 419)
  • Spectra for the Identification of Additives in Food Packaging
  • Spectra for the Identification of Monomers in Food Packaging
  • Stabilization of Polymeric Materials (MacRomolecular Systems, Materials Approach)
  • Stains & Polyurethane
  • Standards and Guidelines for Electroplated Plastics
  • Statistical Physics of Macromolecules (AIP Series in Polymers and Complex Materials)
  • Step-By-Step Compo and Mold Making
  • Stress Analysis of Fiber-Reinforced Composite Materials
  • Structural Adhesives Directory and Databook
  • Structural Analysis of Thermoplastic Components
  • Structural Foam
  • Structural Plastics Design Manual (Asce Manuals and Reports on Engineering Practice, No 63)
  • Structural Plastics Selection Manual (Asce Manuals and Reports on Engineering Practice, No 66)
  • Styrene-Based Plastics and Their Modification (Ellis Horwood Series in Polymer Science and Technology)
  • Superabsorbent Polymers : Science and Technology (Acs Symposium Series, No 573)
  • Superplastic Deformation
  • Surface Analysis of Polymers by Xps and Static Sims (Cambridge Solid State Science Series)
  • Surface Preparation Techniques for Adhesive Bonding (Materials Science and Process Technology Series)
  • Synthetic Adhesives and Sealants (Critical Repor